Jeep JK Shock Absorber Torque Specs (Front & Rear)
Replacing the shock absorbers is one of the most common DIY maintenance tasks on the Jeep Wrangler JK. Proper torque is essential to prevent the shock eyelets from clunking over bumps. View our full Jeep JK Master Torque Database for more specifications.
Front Shock Absorber Specifications
| Mounting Location | Torque Spec (ft-lbs) | Socket Size |
|---|---|---|
| Upper Stem Nut | 20 ft-lbs | 16mm (Varies on aftermarket) |
| Lower Mounting Bolt | 56 ft-lbs | 18mm |
Rear Shock Absorber Specifications
| Mounting Location | Torque Spec (ft-lbs) | Socket Size |
|---|---|---|
| Upper Bar Pin Bolts (2) | 37 ft-lbs | 16mm |
| Lower Mounting Bolt | 56 ft-lbs | 18mm |
FSM Installation Protocol & Warnings
⚠️ INSTALLATION NOTE: When tightening the front upper shock stem nut, you must hold the center shaft with a wrench or specialized tool to prevent the shock piston from spinning internally. Never use an impact gun on the upper stem nut.